A few simple tools build a lot of rifles.Most are low cost.A few are worth buying once and keeping.
1The Shop List
| Tool | Used For |
|---|---|
| 12 or 20 ton shop press | Pressing barrels and setting rivets |
| 6 inch vise or larger | Holding the receiver and parts |
| Drill press | Rivet and pin holes |
| Metric drill bits | Every hole on the receiver |
| Bolt cutter rivet tool | Setting and removing rivets |
| Rivet jig | Holding rivets square |
| Flat bending jig | Bending receiver flats |
| Headspace gauges | Checking the barrel and bolt fit |
| Barrel press jig | Pressing the barrel in and out |
| Trigger guard jig | Riveting the trigger guard |
| Spot welder | Welding the lower rails |
| Rotary tool and angle grinder | Cutting and trimming |
| Torch | Heat treat and small jobs |
| Blaster and air compressor | Prepping for refinish |
| Oven and high temp paint | Baked finishes |
2Buy Once
Headspace gauges and a good rivet tool are the two tools builders say not to skimp on.
Many builders share or rent the larger jigs and presses.